This data package was submitted to a staging environment for testing purposes only. Use of these data for anything other than testing is strongly discouraged.

This data package is not the most recent revision of a series.  (View Newest Revision)

Data Package Summary    View Full Metadata

  • Horizontal Sand Mass Flux Data Derived from 5-stage BSNE Collectors at 18 Sites in the Jornada Basin, 1998-2018
  • Okin, Greg
  • 2019-06-28
  • Okin, G. 2019. Horizontal Sand Mass Flux Data Derived from 5-stage BSNE Collectors at 18 Sites in the Jornada Basin, 1998-2018 ver 101. Environmental Data Initiative. https://doi.org/DOI_PLACE_HOLDER (Accessed 2024-12-28).
  • Collections of airborne sand are obtained at the 15 NPP sites, the Geomet Site, Scrape site, and Pasture 13 site. The collections are taken using BSNE collectors. The collectors are turned into the wind with wind vanes. The amount of material collected corresponds to the horizontal flux at the height of the collector and the opening area of the collector and the duration of the sampling time. The five heights of the BSNE collectors above the soil surface are 5, 10, 20, 50, and 100 centimeters for every location where samples are taken. The hypothesis of the experiment is that the vertical flux of the particles smaller than 10 micrometers is a constant ratio of the horizontal sand flux. The objectives of the experiment are to find patterns of sand flux rates as affected by soil and vegetation. Site info: The NPP sites were established to estimate patterns of aboveground primary production. The Geomet site is within a mesquite-dune area that has had long-term protection from cattle grazing. The scrape site was designed to measure the abrasion of surface crust. The Burn13 site is located in a pasture that was previously burned. Contact the data manager for additional information and site locations. This data collection is ongoing.

  • This information is released under the Creative Commons license - Attribution - CC BY (https://creativecommons.org/licenses/by/4.0/). The consumer of these data ("Data User" herein) is required to cite it appropriately in any publication that results from its use. The Data User should realize that these data may be actively used by others for ongoing research and that coordination may be necessary to prevent duplicate publication. The Data User is urged to contact the authors of these data if any questions about methodology or results occur. Where appropriate, the Data User is encouraged to consider collaboration or co-authorship with the authors. The Data User should realize that misinterpretation of data may occur if used out of context of the original study. While substantial efforts are made to ensure the accuracy of data and associated documentation, complete accuracy of data sets cannot be guaranteed. All data are made available "as is." The Data User should be aware, however, that data are updated periodically and it is the responsibility of the Data User to check for new versions of the data. The data authors and the repository where these data were obtained shall not be liable for damages resulting from any use or misinterpretation of the data. Thank you.
  • DOI PLACE HOLDER
  • Analyze this data package using:           

EDI is a collaboration between the University of New Mexico and the University of Wisconsin – Madison, Center for Limnology:

UNM logo UW-M logo