This data package was submitted to a staging environment for testing purposes only. Use of these data for anything other than testing is strongly discouraged.

This data package is not the most recent revision of a series.  (View Newest Revision)

Data Package Summary    View Full Metadata

  • Jornada Basin ConMod Pilot Study, BSNE dust collector sample weights at three study sites, 2008-2016
  • Okin, Gregory S; UCLA
  • 2019-07-01
  • Okin, G.S. 2019. Jornada Basin ConMod Pilot Study, BSNE dust collector sample weights at three study sites, 2008-2016 ver 15. Environmental Data Initiative. https://doi.org/DOI_PLACE_HOLDER (Accessed 2024-12-28).
  • This data package contains measurements of dust collected by BSNE collectors at long-term study plots in the Jornada Experimental Range. These measurements are associated with the "Cross-scale Connectivity", or ConMod, pilot study conducted from 2008-2016. There are 3 sites for this study: Gravelly Ridges, Aeolian, and Dona Ana. Within each site, there are 8 plots. The plots are 8x8 meters and have an 8x8 buffer zone on both sides of the plot (up and down). There are four BSNE (aeolian dust collector) stands for each plot, 2 in each of the 2 buffer zones (8 collectors per plot). Each stand contains 2 BSNE collectors with the collection opening at 10cm and 30cm height and an opening of 2 cm wide and 5 cm height. These BSNE collectors are in a fixed position pointing into the direction of the prevailing wind, which corresponds to the plot alignment. The collectors in the upwind buffer are facing away from the plot and the collectors in the downwind buffer are facing into the plot. The idea is the upwind BSNEs measure the amount of dust entering the plot, and the downwind BSNEs measure the amount of dust moving off the plot. This provides a measure of the effectiveness of the plot obstructions to wind blown dust. It is important the BSNEs are fixed in an orientation that points across the full length of the plot. This study was completed in 2016.

  • Geographic Coordinates
    • N: 32.7494871013, S: 32.4731725883, E: -106.692716261, W: -106.87288312
    • N: 32.68957116, S: 32.53118449, E: -106.5903632, W: -106.6846111
    • N: 32.5427713, S: 32.46722784, E: -106.7294433, W: -106.8514602
  • This information is released under the Creative Commons license - Attribution - CC BY (https://creativecommons.org/licenses/by/4.0/). The consumer of these data ("Data User" herein) is required to cite it appropriately in any publication that results from its use. The Data User should realize that these data may be actively used by others for ongoing research and that coordination may be necessary to prevent duplicate publication. The Data User is urged to contact the authors of these data if any questions about methodology or results occur. Where appropriate, the Data User is encouraged to consider collaboration or co-authorship with the authors. The Data User should realize that misinterpretation of data may occur if used out of context of the original study. While substantial efforts are made to ensure the accuracy of data and associated documentation, complete accuracy of data sets cannot be guaranteed. All data are made available "as is". The Data User should be aware, however, that data are updated periodically and it is the responsibility of the Data User to check for new versions of the data. The data authors and the repository where these data were obtained shall not be liable for damages resulting from any use or misinterpretation of the data. Thank you.
  • DOI PLACE HOLDER
  • Analyze this data package using:           

EDI is a collaboration between the University of New Mexico and the University of Wisconsin – Madison, Center for Limnology:

UNM logo UW-M logo