Check against LTER requirements for scope.identifier.revision
'scope.n.m', where 'n' and 'm' are integers and 'scope' is one of an allowed set of values
edi.465.4
2
emlVersion
valid
Type:
metadata
System:
lter
On failure:
error
EML version 2.1.0 or beyond
Check the EML document declaration for version 2.1.0 or higher
eml://ecoinformatics.org/eml-2.1.0 or higher
https://eml.ecoinformatics.org/eml-2.2.0
Validity of this quality report is dependent on this check being valid.
3
schemaValid
valid
Type:
metadata
System:
knb
On failure:
error
Document is schema-valid EML
Check document schema validity
schema-valid
Document validated for namespace: 'https://eml.ecoinformatics.org/eml-2.2.0'
Validity of this quality report is dependent on this check being valid.
4
parserValid
valid
Type:
metadata
System:
knb
On failure:
error
Document is EML parser-valid
Check document using the EML IDs and references parser
Validates with the EML IDs and references parser
EML IDs and references parser succeeded
Validity of this quality report is dependent on this check being valid.
5
schemaValidDereferenced
valid
Type:
metadata
System:
lter
On failure:
error
Dereferenced document is schema-valid EML
References are dereferenced, and the resulting file validated
schema-valid
Dereferenced document validated for namespace: 'https://eml.ecoinformatics.org/eml-2.2.0'
Validity of this quality report is dependent on this check being valid.
6
keywordPresent
valid
Type:
metadata
System:
lter
On failure:
warn
keyword element is present
Checks to see if at least one keyword is present
Presence of one or more keyword elements
6 'keyword' element(s) found
7
methodsElementPresent
valid
Type:
metadata
System:
lter
On failure:
warn
A 'methods' element is present
All datasets should contain a 'methods' element, at a minimum a link to a separate methods doc.
presence of 'methods' at one or more xpaths.
1 'methods' element(s) found
EML Best Practices, p. 28
8
coveragePresent
valid
Type:
metadata
System:
lter
On failure:
warn
coverage element is present
At least one coverage element should be present in a dataset.
At least one of geographicCoverage, taxonomicCoverage, or temporalCoverage is present in the EML.
1 'coverage' element(s) found
9
geographicCoveragePresent
info
Type:
metadata
System:
lter
On failure:
info
geographicCoverage is present
Check that geographicCoverage exists in EML at the dataset level, or at least one entity's level, or at least one attribute's level.
geographicCoverage at least at the dataset level.
1 'geographicCoverage' element(s) found
Many but not all datasets are appropriate to have spatial coverage.
If sampling EML is used within methods, does that obviate geographicCoverage? Or should those sites be repeated or referenced?
EML Best Practices v.2, p. 22-23. "One geographicCoverage element should be included, whose boundingCoordinates describe the extent of the data....Additional geographicCoverage elements may be entered at the dataset level if there are significant distances between study sites and it would be confusing if they were grouped into one bounding box." 6 decimal places.
10
taxonomicCoveragePresent
info
Type:
metadata
System:
lter
On failure:
info
taxonomicCoverage is present
Check that taxonomicCoverage exists in EML at the dataset level, or at least one entity's level, or at least one attribute's level.
taxonomicCoverage at least at the dataset level.
7 'taxonomicCoverage' element(s) found
Only when taxa are pertinent to the dataset will they have taxonomicCoverage.
Could search title, abstract, keywords for any taxonomic name (huge). Could search keywordType="taxonomic".
EML Best Practices v.2, p. 25
11
temporalCoveragePresent
info
Type:
metadata
System:
lter
On failure:
info
temporalCoverage is present
Check that temporalCoverage exists in EML at the dataset level, or at least one entity's level, or at least one attribute's level.
temporalCoverage at least at the dataset level.
1 'temporalCoverage' element(s) found
LTER wants to search datasets by time; the best place to search is the dataset level temporal coverage.
Most datasets have a temporal range.
EML Best Practices v.2, p. 24
12
pastaDoiAbsent
valid
Type:
metadata
System:
lter
On failure:
error
An alternateIdentifier with a DOI system attribute that looks like it is generated by PASTA should not be present
Reject the data package if it contains an alternateIdentifier DOI that looks like PASTA generated it.
No PASTA DOIs are expected to be found in the uploaded data package
No PASTA DOI alternateIdentifier elements found
PASTA DOI values might appear in an uploaded data package (by various mechanisms). PASTA will assign a DOI after the upload has completed successfully, so an initial one should not be there.
13
titleLength
valid
Type:
metadata
System:
lter
On failure:
warn
Dataset title length is at 5 least words.
If the title is shorter than 5 words, it might be insufficient. Title word count between 7 and 20 including prepositions and numbers.
Between 7 and 20 words
11 words found.
EML Best Practices, v.2, p. 13
14
pubDatePresent
valid
Type:
metadata
System:
lter
On failure:
warn
'pubDate' element is present
Check for presence of the pubDate element
The date that the dataset was submitted for publication in PASTA must be included.
(The EML schema does not require this element, but when present, it does constrain its
format to YYYY-MM-DD or just YYYY. Citation format uses only the YYYY portion even if a
full date is entered.)
2020-02-01
EML Best Practices v.2, p. 17
15
datasetAbstractLength
valid
Type:
metadata
System:
lter
On failure:
warn
Dataset abstract element is a minimum of 20 words
Check the length of a dataset abstract and warn if less than 20 words.
An abstract is 20 words or more.
130 words found.
EML Best Practices
16
duplicateEntityName
valid
Type:
metadata
System:
lter
On failure:
error
There are no duplicate entity names
Checks that content is not duplicated by other entityName elements in the document
entityName is not a duplicate within the document
No duplicates found
Data Manager requires a non-empty, non-duplicate entityName value for every entity
Declare a non-empty entityName and ensure that there are no duplicate entityName values in the document
Entity Report
Entity Name:
Annual cover measurements at Jasper Ridge 1983-2015, all plants
Entity Identifier:
#
Identifier
Status
Quality Check
Name
Description
Expected
Found
Explanation
Suggestion
Reference
1
entityNameLength
valid
Type:
metadata
System:
knb
On failure:
warn
Length of entityName is not excessive (less than 100 char)
length of entity name is less than 100 characters
entityName value is 100 characters or less
63
2
entityDescriptionPresent
valid
Type:
metadata
System:
lter
On failure:
warn
An entity description is present
Check for presence of an entity description.
EML Best practices pp. 32-33, "...should have enough information for a user..."
true
With entityName sometimes serving as a file name rather than a title, it is important to be very descriptive here.
3
numHeaderLinesPresent
info
Type:
metadata
System:
knb
On failure:
info
'numHeaderLines' element is present
Check for presence of the 'numHeaderLines' element.
Document contains 'numHeaderLines' element.
'numHeaderLines' element: 1
4
numFooterLinesPresent
info
Type:
metadata
System:
knb
On failure:
info
'numFooterLines' element is present
Check for presence of the 'numFooterLines' element.
Document contains 'numFooterLines' element.
No 'numFooterLines' element found
If data file contains footer lines, 'numFooterLines' must be specified.
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 7130 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
b2a9a826f77e3b80bff5703115fd790a
b2a9a826f77e3b80bff5703115fd790a
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
7130
7130
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 5992 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
bec0db5493dc0df322618e842e67d342
bec0db5493dc0df322618e842e67d342
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
5992
5992
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 5000 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
dba7cfc91294ac41d2ceee70b0c34592
dba7cfc91294ac41d2ceee70b0c34592
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
5000
5000
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 5930 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
17eb8f713c727c8e03918836e6bc3586
17eb8f713c727c8e03918836e6bc3586
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
5930
5930
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 5534 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
8b7c8d078fc9e2a1f112e3832fa9b94b
8b7c8d078fc9e2a1f112e3832fa9b94b
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
5534
5534
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 5294 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
68967f9e020b45e2e6d92f8cddaf860a
68967f9e020b45e2e6d92f8cddaf860a
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
5294
5294
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 5752 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
3919ff0ad18291386e62abc548fa3a81
3919ff0ad18291386e62abc548fa3a81
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
5752
5752
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 4448 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
a3f598ad6fd42ff9c9f99e7b5e3e743f
a3f598ad6fd42ff9c9f99e7b5e3e743f
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
4448
4448
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 944 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
ae6ae678db2e96cb006c9fe2568bd1b6
ae6ae678db2e96cb006c9fe2568bd1b6
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
944
944
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Succeeded in accessing URL: file:///home/pasta/local/data/edi.465.4/230b1b68bda38a9e4c1131669bb9d9f6
17
examineRecordDelimiter
valid
Type:
congruency
System:
knb
On failure:
warn
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 1281 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
41d3857543750c57f5077b0e91e0189a
41d3857543750c57f5077b0e91e0189a
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
12
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
1281
1281
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
13
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 2851 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
ad479303083d75827e027b3940725b04
ad479303083d75827e027b3940725b04
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
13
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
2851
2851
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
14
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 6154 with no unit specified (defaults to 'byte').
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
7a1ab3a285d164841f3785d88c6bd8bd
7a1ab3a285d164841f3785d88c6bd8bd
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
13
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
6154
6154
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
14
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 60336 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
8
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
9
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
a8e5262e0789ffcc19e2fcc5b94b9878
a8e5262e0789ffcc19e2fcc5b94b9878
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
10
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
60336
60336
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
Entity Report
Entity Name:
analysis code, plotClusterMap_JRG.R
Entity Identifier:
#
Identifier
Status
Quality Check
Name
Description
Expected
Found
Explanation
Suggestion
Reference
1
entityNameLength
valid
Type:
metadata
System:
knb
On failure:
warn
Length of entityName is not excessive (less than 100 char)
length of entity name is less than 100 characters
entityName value is 100 characters or less
35
2
entityDescriptionPresent
valid
Type:
metadata
System:
lter
On failure:
warn
An entity description is present
Check for presence of an entity description.
EML Best practices pp. 32-33, "...should have enough information for a user..."
true
With entityName sometimes serving as a file name rather than a title, it is important to be very descriptive here.
3
numHeaderLinesPresent
info
Type:
metadata
System:
knb
On failure:
info
'numHeaderLines' element is present
Check for presence of the 'numHeaderLines' element.
Document contains 'numHeaderLines' element.
No 'numHeaderLines' element found
If data file contains header lines, 'numHeaderLines' must be specified.
Add 'numHeaderLines' element if needed.
4
numFooterLinesPresent
info
Type:
metadata
System:
knb
On failure:
info
'numFooterLines' element is present
Check for presence of the 'numFooterLines' element.
Document contains 'numFooterLines' element.
No 'numFooterLines' element found
If data file contains footer lines, 'numFooterLines' must be specified.
Add 'numFooterLines' element if needed.
5
fieldDelimiterValid
info
Type:
metadata
System:
knb
On failure:
error
Field delimiter is a single character
Field delimiters should be one character only
A single character is expected
null
A fieldDelimiter value is not checked for binary entities or entities with an externally defined format
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 7022 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
8
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
9
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
2e3e5176e5178dc49c48a05eb3bdcad7
2e3e5176e5178dc49c48a05eb3bdcad7
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
10
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
7022
7022
Examining the entity size is a method for checking that this is the correct entity.