Check against LTER requirements for scope.identifier.revision
'scope.n.m', where 'n' and 'm' are integers and 'scope' is one of an allowed set of values
knb-lter-kbs.150.1
2
emlVersion
valid
Type:
metadata
System:
lter
On failure:
error
EML version 2.1.0 or beyond
Check the EML document declaration for version 2.1.0 or higher
eml://ecoinformatics.org/eml-2.1.0 or higher
https://eml.ecoinformatics.org/eml-2.2.0
Validity of this quality report is dependent on this check being valid.
3
schemaValid
valid
Type:
metadata
System:
knb
On failure:
error
Document is schema-valid EML
Check document schema validity
schema-valid
Document validated for namespace: 'https://eml.ecoinformatics.org/eml-2.2.0'
Validity of this quality report is dependent on this check being valid.
4
parserValid
valid
Type:
metadata
System:
knb
On failure:
error
Document is EML parser-valid
Check document using the EML IDs and references parser
Validates with the EML IDs and references parser
EML IDs and references parser succeeded
Validity of this quality report is dependent on this check being valid.
5
schemaValidDereferenced
valid
Type:
metadata
System:
lter
On failure:
error
Dereferenced document is schema-valid EML
References are dereferenced, and the resulting file validated
schema-valid
Dereferenced document validated for namespace: 'https://eml.ecoinformatics.org/eml-2.2.0'
Validity of this quality report is dependent on this check being valid.
6
keywordPresent
valid
Type:
metadata
System:
lter
On failure:
warn
keyword element is present
Checks to see if at least one keyword is present
Presence of one or more keyword elements
7 'keyword' element(s) found
7
methodsElementPresent
valid
Type:
metadata
System:
lter
On failure:
warn
A 'methods' element is present
All datasets should contain a 'methods' element, at a minimum a link to a separate methods doc.
presence of 'methods' at one or more xpaths.
1 'methods' element(s) found
EML Best Practices, p. 28
8
coveragePresent
valid
Type:
metadata
System:
lter
On failure:
warn
coverage element is present
At least one coverage element should be present in a dataset.
At least one of geographicCoverage, taxonomicCoverage, or temporalCoverage is present in the EML.
1 'coverage' element(s) found
9
geographicCoveragePresent
info
Type:
metadata
System:
lter
On failure:
info
geographicCoverage is present
Check that geographicCoverage exists in EML at the dataset level, or at least one entity's level, or at least one attribute's level.
geographicCoverage at least at the dataset level.
2 'geographicCoverage' element(s) found
Many but not all datasets are appropriate to have spatial coverage.
If sampling EML is used within methods, does that obviate geographicCoverage? Or should those sites be repeated or referenced?
EML Best Practices v.2, p. 22-23. "One geographicCoverage element should be included, whose boundingCoordinates describe the extent of the data....Additional geographicCoverage elements may be entered at the dataset level if there are significant distances between study sites and it would be confusing if they were grouped into one bounding box." 6 decimal places.
10
taxonomicCoveragePresent
info
Type:
metadata
System:
lter
On failure:
info
taxonomicCoverage is present
Check that taxonomicCoverage exists in EML at the dataset level, or at least one entity's level, or at least one attribute's level.
taxonomicCoverage at least at the dataset level.
92 'taxonomicCoverage' element(s) found
Only when taxa are pertinent to the dataset will they have taxonomicCoverage.
Could search title, abstract, keywords for any taxonomic name (huge). Could search keywordType="taxonomic".
EML Best Practices v.2, p. 25
11
temporalCoveragePresent
info
Type:
metadata
System:
lter
On failure:
info
temporalCoverage is present
Check that temporalCoverage exists in EML at the dataset level, or at least one entity's level, or at least one attribute's level.
temporalCoverage at least at the dataset level.
1 'temporalCoverage' element(s) found
LTER wants to search datasets by time; the best place to search is the dataset level temporal coverage.
Most datasets have a temporal range.
EML Best Practices v.2, p. 24
12
pastaDoiAbsent
valid
Type:
metadata
System:
lter
On failure:
error
An alternateIdentifier with a DOI system attribute that looks like it is generated by PASTA should not be present
Reject the data package if it contains an alternateIdentifier DOI that looks like PASTA generated it.
No PASTA DOIs are expected to be found in the uploaded data package
No PASTA DOI alternateIdentifier elements found
PASTA DOI values might appear in an uploaded data package (by various mechanisms). PASTA will assign a DOI after the upload has completed successfully, so an initial one should not be there.
13
titleLength
valid
Type:
metadata
System:
lter
On failure:
warn
Dataset title length is at 5 least words.
If the title is shorter than 5 words, it might be insufficient. Title word count between 7 and 20 including prepositions and numbers.
Between 7 and 20 words
33 words found.
EML Best Practices, v.2, p. 13
14
fundingPresence
valid
Type:
metadata
System:
lter
On failure:
warn
check to see if funding element is present
Checks to see if the funding element is included.
the funding element is expected to be included
National Science Foundation
15
datasetAbstractLength
valid
Type:
metadata
System:
lter
On failure:
warn
Dataset abstract element is a minimum of 20 words
Check the length of a dataset abstract and warn if less than 20 words.
An abstract is 20 words or more.
268 words found.
EML Best Practices
16
duplicateEntityName
valid
Type:
metadata
System:
lter
On failure:
error
There are no duplicate entity names
Checks that content is not duplicated by other entityName elements in the document
entityName is not a duplicate within the document
No duplicates found
Data Manager requires a non-empty, non-duplicate entityName value for every entity
Declare a non-empty entityName and ensure that there are no duplicate entityName values in the document
Entity Report
Entity Name:
final_flwr_sd_L1
Entity Identifier:
#
Identifier
Status
Quality Check
Name
Description
Expected
Found
Explanation
Suggestion
Reference
1
entityNameLength
valid
Type:
metadata
System:
knb
On failure:
warn
Length of entityName is not excessive (less than 100 char)
length of entity name is less than 100 characters
entityName value is 100 characters or less
16
2
entityDescriptionPresent
valid
Type:
metadata
System:
lter
On failure:
warn
An entity description is present
Check for presence of an entity description.
EML Best practices pp. 32-33, "...should have enough information for a user..."
true
With entityName sometimes serving as a file name rather than a title, it is important to be very descriptive here.
3
numHeaderLinesPresent
info
Type:
metadata
System:
knb
On failure:
info
'numHeaderLines' element is present
Check for presence of the 'numHeaderLines' element.
Document contains 'numHeaderLines' element.
'numHeaderLines' element: 1
4
numFooterLinesPresent
info
Type:
metadata
System:
knb
On failure:
info
'numFooterLines' element is present
Check for presence of the 'numFooterLines' element.
Document contains 'numFooterLines' element.
No 'numFooterLines' element found
If data file contains footer lines, 'numFooterLines' must be specified.
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 5257721 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/final_flwr_sd_L1.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
3af119b5385cea742a70b7ac54a6c38b
3af119b5385cea742a70b7ac54a6c38b
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
5257721
5257721
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 4717385 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/final_plantcomp_L1.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
23b18d0620c56d03b2db1b3b983f48fa
23b18d0620c56d03b2db1b3b983f48fa
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
4717385
4717385
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 1461163 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/final_herbivory_L1.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
a522cbbccde0589096d43c2124451ab8
a522cbbccde0589096d43c2124451ab8
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
1461163
1461163
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 22363290 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD hh:mm:ss
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/UMBS_pairedsensors_L1.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
53080f8b685f203237c209722a646185
53080f8b685f203237c209722a646185
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
22363290
22363290
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 19741503 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD hh:mm:ss
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/KBS_pairedsensors_L1.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
e03a38773078aaf5fe80c6dc659f4871
e03a38773078aaf5fe80c6dc659f4871
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
19741503
19741503
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 141794 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/CN_L1.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
ab05f4922c67c8debca885a730a5a9b2
ab05f4922c67c8debca885a730a5a9b2
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
141794
141794
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 147596 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/SLA_L1_dateFix.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
84cf4f7cbebad1ed0f7df1bc269e1860
84cf4f7cbebad1ed0f7df1bc269e1860
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
147596
147596
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 41090 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/kbs_biomass_2021_L1.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
5e36f048784e1124b9a727f278d97f71
5e36f048784e1124b9a727f278d97f71
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
41090
41090
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 37909 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/umbs_biomass_2021_L1.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
1775223d334ace83774d3509e4acbf41
1775223d334ace83774d3509e4acbf41
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
37909
37909
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 612 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/plot.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
22e867dfd409a2e3d42a88be3f18a66a
22e867dfd409a2e3d42a88be3f18a66a
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
612
612
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Succeeded in accessing URL: <![CDATA[file:///home/pasta/local/data/knb-lter-kbs.150.1/32fa6e1b78a9d4028953e60564a2aa4c]]>
18
examineRecordDelimiter
valid
Type:
congruency
System:
knb
On failure:
warn
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 12258 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/taxon.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
90375d3e05ff52019db7c65ec01b55dc
90375d3e05ff52019db7c65ec01b55dc
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
12258
12258
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 14217384 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD hh:mm:ss.sss-hh:mm
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/KBS_HOBOpendant_L1.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
1c01627260cb5f466249aa1b923970fa
1c01627260cb5f466249aa1b923970fa
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
14217384
14217384
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 22057452 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
dateTimeFormatString
valid
Type:
metadata
System:
knb
On failure:
warn
dateTime/formatString specified in metadata is from a preferred set of values
Certain features of dateTime data formats are preferred, eg, ISO 8601, 4-digit years.
This check looks at metadata to see if the dateTime format is in that preferred list.
A formatString value that is a member of the preferred set is expected.
YYYY-MM-DD hh:mm:ss.sss-hh:mm
A preferred format string was found.
Modify the dateTime/formatString, selecting from among the preferred values one that best matches the data format
11
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
12
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/UMBS_HOBOpendant_L1.csv]]>
15
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
7b2e1bb185fa8e4438bf2305ad74638d
7b2e1bb185fa8e4438bf2305ad74638d
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
16
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
22057452
22057452
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
17
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 11688 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/KBS_PAR_L1.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
edf55d2dee4bf9de05388362f4e0b697
edf55d2dee4bf9de05388362f4e0b697
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
11688
11688
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 44903 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/UMBS_PAR_L1.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
d26299b39647f2f221f30dd6b34d0009
d26299b39647f2f221f30dd6b34d0009
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
44903
44903
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 43213 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/biomass_2020_L1.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
863eb974e42c7500fb5aaa8d1285c972
863eb974e42c7500fb5aaa8d1285c972
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
43213
43213
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 26251 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/2015_KBS_Insect_Composition.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
0c48fd6ac960f6e5f622ddcf6f1cba61
0c48fd6ac960f6e5f622ddcf6f1cba61
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
26251
26251
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected
Warn the user if the numberOfRecords check is not present
A number of records element is expected for this entity
numberOfRecords element found
This is a valuable check that we have the correct table.
8
entitySizePresence
valid
Type:
metadata
System:
knb
On failure:
warn
Check for presence of an entity size element
Look for entity size element as a prep for checking congruence, and if not present, generate a warn. Note that to be most useful (i.e, to check congruence), entity size should contain the most precise measure of size, which is "byte" (the default unit); however, the presence or name of the entity size unit is NOT checked.
Entity size is present. If unit="byte" or unit is omitted (default = byte), then congruence can be checked.
Found entity size element with value of 2038 and size unit specified as 'byte'.
Examining the entity size is prep for checking congruence. Including the element is best practice, and if not present, a warn is generated. To be most useful, entity size should contain the most precise measure of size, which is "byte" (the default unit).
Include an entity size in bytes
Example success: knb-lter-sbc.3.12. Example of size in units other than byte: knb-lter-mcr.6.56.
9
integrityChecksumPresence
valid
Type:
metadata
System:
lter
On failure:
warn
A physical/authentication element is present and specifies a method attribute with a value of MD5 or SHA-1
Check for presence of a physical/authentication element containing a checksum or hash value for an integrity check (e.g. MD5, SHA-1). Warn if an entity does not have a physical/authentication element, or if none of the physical/authentication elements specify a method attribute with a value of MD5 or SHA-1.
At least one physical/authentication element with a method attribute specifying MD5 or SHA-1 and containing a checksum or hash value that can be used to perform an integrity check on the data.
true
PASTA will use this value to check the integrity of the data it downloads from your site. In addition, PASTA is planning to compare the contributor-supplied checksum/hash value documented
in the physical/authentication element to the checksum/hash value of this entity downloaded from previous revisions of this data package. If PASTA already has a copy of this entity, it will be able
to avoid an unnecessary download of the entity from your site, resulting in faster processing of the new data package revision when you update it in PASTA.
Add a physical/authentication element and store the entity checksum or hash value in it using a method such as MD5 or SHA-1.
10
attributeNamesUnique
valid
Type:
metadata
System:
knb
On failure:
warn
Attribute names are unique
Checks if attributeName values are unique in the table. Not required by EML.
Unique attribute names.
true
A good table does not have duplicate column names.
EML Best Practices
11
displayDownloadData
info
Type:
data
System:
knb
On failure:
info
Display downloaded data
Display the first kilobyte of data that is downloaded
Succeeded in accessing URL: <![CDATA[https://ezeml.edirepository.org/user-data/Moriah_Young-b73451b59ae67b340050f1929b7b7c91/uploads/warmXtrophic%20multiyear/2015_Composition_Key.csv]]>
14
integrityChecksum
valid
Type:
congruency
System:
lter
On failure:
error
Compare the metadata checksum for an entity to the checksum of the downloaded entity
Two possible responses: valid if checksums match; error if checksums do not match.
11a4cc4d54c93af8f434c80da49e51cc
11a4cc4d54c93af8f434c80da49e51cc
Matching checksums will ensure data integrity during upload to the repository.
If the found integrity hash value does not match the expected integrity hash value, there may have been a loss of integrity in the data download. Check that the hash method and hash value documented in the metadata are the correct values.
15
entitySizeCongruence
valid
Type:
congruency
System:
knb
On failure:
error
Check that the entity size in the Level 0 metadata matches the one PASTA+ generates.
Compare raw file size of file to [entity]/physical/size element in metadata. Return error if not matching.
2038
2038
Examining the entity size is a method for checking that this is the correct entity.
Check the entity size.
16
databaseTableCreated
valid
Type:
metadata
System:
knb
On failure:
error
Database table created
Status of creating a database table
A database table is expected to be generated from the EML attributes.
A database table was generated from the attributes description
Data are examined and possible record delimiters are displayed
If no record delimiter was specified, we assume that \r\n is the delimiter. Search the first row for other record delimiters and see if other delimiters are found.
No other potential record delimiters expected in the first row.
No other potential record delimiters were detected. A valid record delimiter was previously detected